IMA HYDRA 1000 4 I, BLUE GALAXY 870 FL Washing and sterilizing line for glass containers used in pharmaceutical industry

Výrobce

IMA

Typ

HYDRA 1000 4 I, BLUE GALAXY 870 FL

Rok výroby

2015

Uložení

Poland

Popis

Washing and sterilizing line for glass containers used in pharmaceutical industry, consisting of:

Linear washer - HYDRA 1000 4 I

The machine ensures the removal of at least 3 log. of particulate contamination (particles such as glass, fibres, oxides, etc.). The machine has been designed and manufactured conforming to cGMP standards.

TECHNICAL DATA

OPERATING SPEED: up to 3.600 containers / hour
SIZE RANGE OF THE CONTAINERS:
min. diam. 50 mm
max. diam. 80 mm
max. height 180 mm
min. mouth diam. 10 mm

W.F.I. SUPPLY PRESSURE: 2,5 - 4 bar (1,5" Tri-clover clamp)
DEMINERALIZED WATER SUPPLY PRESSURE : 2,5-4 bar (1,5" Tri-clover clamp)
COMPRESSED AIR SUPPLY PRESSURE : 6 - 10 bar (1,5" Tri-clover clamp)
STANDARD POWER SUPPLY VOLTAGE : 400 Volts-50 Hz- 3 PHASE + N + G
INSTALLED POWER: 5 KW
HEAT LOSS: 4 KW
SOUND EMISSION LEVEL: < 80 Db.
HEIGHT OF UNLOADING SURFACE: 950 mm.(+/- 25) mm
**MACHINE DIMENSIONS:
width 1650 mm
length 3655 mm
height 2000 mm
**MACHINE WEIGHT:
1650 Kg
ENVIROMENTAL DATA:
Temperature 5-40°C
Relative humidity <70%
Altitude < 2000 meters
---------------------------------------------------------------------------------

Sterilizing tunnel - BLUE GALAXY 870 FL

The tunnel has been designed for insertion into production lines requiring continuous dry heat depyrogenation of glass containers. Exposed to a vertical flow of heated air (maximum working temperature 350°C), the container, at its coldest point, reaches temperatures equivalent to 250° C for 15 minutes (3 log. depyrogenation, ref. E.COLI 055-B5, where Z=46,4°C, D-5 min., T.ref.=250°C).
Class 5 air according to ISO 14644 is guaranteed for the entire length of the tunnel.

TECHNICAL SPECIFICATION
Standard power supply: 400 Volt - 50 Hz. - 3 PH + N + G
POWER
- Main (heating) 40 kW
- Cold Chamber 24 kW
- UPS (fans) 10 kW
- total installed power 74 kW
Air temperature heating zone (at speed): max. 350°C
Air temperature cooling zone (at speed): max. 18°C
Final temperature containers at outfeed: 25°C
Cooling water:
-temperature at infeed: 9 - 11°C max.
-flow rate: 8000 LT/H
Aspiration at infeed zone (at speed) 1500 M 3 /H
Air expelled from infeed zone (at speed): 1400 M 3 /H
Temp. air expelled from infeed zone: 30-70°C
Air supply in heating zone (at speed): 200 M3/H

Recycled air flow rate:
- heating zone: 1860 M3/H
- cooling zone: 2160 M3/H
Heat loss in the environment: approx. 10 kW

DIMENSIONS AND WEIGHTS
- length: 3050 mm
- width: 2025 mm
- height: 2980 mm
-weight 3400 kg
- useful belt height 950 +/- 25 mm
- useful belt width 870 mm
- useful hot zone length 904 mm
- useful hot zone surface 0,787 m2
- useful cooling zone length 1044 mm
- useful cooling zone surface 0,910 m2

The lines were manufactured and delivered in 2015 (November). The lines after delivery were never used; they are packed hermetically and stored in this condition. Before the delivery, the lines were subjected to the manufacturer's FAT tests (Factory Acceptance Test), which was confirmed by the protocol confirming that all technical and quality requirements were met.

Učinit nabídku od

EUR 250 000

Manažer prodeje:

NetBid Polska

NetBid Polska T (48) 22 636 02 70 (english speaking), Email: pl@netbid.com