- manufacturer
- Jagenberg Varidur
- Description
- Technical data:
- Narrow cut width normal: 150 mm
- Single tracks: 100 mm
Smaller cutting widths on request:
Diameter of the winding roll:
- Maximum: 1525 mm
- Minimum: (mechanically ejectable): 350 mm
- Smallest outer diameter of the rewinding h¨ilsen: 90 mm
- Diameter of the supporting rollers: 410 mm
- The length of the bale of the carrying rollers = working width +: 150 mm
- Diameter of pneumatic roller: 240 mm
- Diameter of pressure roller: 235 mm
Compressed air
- Operating pressure for all pneumatic devices: 6atü; cleaned, oil- and water-free compressed air provided
. - Suction volume of a compressor to be provided by you, if any, with a pressure chamber capacity at 10 atü: 0.7 Nm3/min. 1 m3
The prerequisite is that rolls with a diameter of at least 700 mm are rolled. If rolls of smaller diameter are produced for a longer time, the suction quantity must be 1.5 Nm3/min.
Normal voltage for motors: 380 volt, 50 hertz
The machine processes coated and uncoated cardboard with a basis weight of 300 to 900 grams/m².
The reception of the offer will be awarded with reservation until the approval of the entitled party! - by order of:
- NetBid GmbH (Austria)
*** ended *** Jagenberg Varidur Roll cutter
PreviousAuction Type
Auction Premium- ends:
- 01/01/2020
14:30 - number of bids:
- 1 Gebot
- Status:
- Auction closed
- Item no.:
- X15931-108
- surcharge
- 15.00%
Roll cutter
Item no.: X15931-108
login
You must be logged in to use this functionality.
It is not possible to bid on this machine at this moment
* Bids and limits plus commission and vat
There will be no delivery. Assets are sold as is/where is. For your calculation please keep in mind the additional cost for removal, transportation, insurance and so on.
* Bids over € 5.000 are accepted with Bank Certificate (this also applies to further auctions).
-
Details Roll cutter
-
Contact
Andreas Weinberger (German, English)
Tel +43 6991 66 68 262
weinberger@netbid.com