- Producto
- Myrton
- Modelo
- HSM-85A
- Descripción
- Technical data:
X movement: 850 mm
Y-movement: 650 mm
Z-movement: 600 mm
Space between the spindle and the table level: 165 ~ 765mm
T-groove: 18 mm
Table capacity 800kg
Desktop-size: 1.300 x 600 mm
Max. spindle rotation number: eingebaute Option: 15000 rot / min
Spindle: BT 40
Spindle drive: built in option: direct
Main engine capacity: min. 10 kW
Torque of the working spindle: min. 63,7 Nm
Rapid traverse X-, Y- and Z-axis min. 20.000 mm / min
Track forward feed: 10000 mm / min
Tool magazine: built in option: 24 tool places
ATC-Type: built in option: Gear shift
Standard accessories
Engineering"Pyramide"
German clutches
CE-certificate for electrical components
German TÜV CE certificate
Italian pneumatic system
Pneumatic- / Hydraulic cylinder for latching/ unlatching of the tools
Heat exchanger for the control cabinet
Telescopic protection for X / Y / Z-ball screw drive
3 manual cooling water outlets on the spindle
Blower from the spindle during tool change
Air inlet on the spindle for air cooled cutting
High volume cooling water tank
Working room lamp
Control light for three colour modes
RS-232 C-interface
Automatic shut-off
Fixed knocking
4 litre central lubrication system (High pressure)
Completely enclosed work space with door protection
Known defects
X- and Y-slides have to be renewed
The engine of the spindle’s cooling system has to either be renewed or replaced.
Machine data comply with data sheets and are without guarantee! - Orden de venta:
- NetBid GmbH (Austria)
*** Terminada *** Myrton HSM-85A Machining centre with Heidenhain-controlling
AtrásFormatos Oferta
Trading Premium- Cierre:
- 30/01/2020
10:10 - Ofertas existentes:
- 1 Puja
- Estado
- Venta Cerrada
- Número de oferta:
- V15288-F001 (X15321-1)
- Comisión
- 15,00%
Machining centre with Heidenhain-controlling
Número de oferta: V15288-F001 (X15321-1)
Login
Usted debe haber iniciado la sesión para poder ultilizar esta función.
Recomendar
Acordar visita
Ya no se puede pujar por este lote.
* La puja y el limite se consideran mas comision e IVA.
No se realiza ninguna entrega. En su cálculo, por favor, considere los gastos adicionales para el desmantelamiento, transporte, seguro, etc.
* La Pujas superiores a € 5.000 se aceptarán tan solo cuando se acompañen de un Certificado Bancario (que será aplicable a futuras subastas).
-
Detalles Machining centre with Heidenhain-controlling