- Producto
- Strojegradnja d.o.o.
- Modelo
- SAS 630 HSC
- Año de construcción
- 2007
- Descripción
- CNC Machining center for making various aluminum castings.
Working range: X-axis: 700 mm, Y-axis: 630 mm, Z-axis: 550 mm;
Swivel pallet table: 360,000 x 0.001;
Motor spindle: GNM HSC 240-24000 / 18 HSK A63R;
Motor-spindle with increased speed;
Max drive power at 100% / 40%: 18/23 kW;
Power: 20-24,000 / min-1;
Max torque at 100% / 40%: 61/81 Nm;
Spindle bearing type: Hybrid;
Inner bearing diameter: 70 mm;
Dynamics: X, Y, and Z-axis acceleration: 8 m / s2;
Path measurement: - X, Y, and Z-axes absolute measurement system for reading accuracy: 0.001 mm
- B-axis absolute measuring system for angle measurement, on the axis of the turntable, company Heidenhain.
Electrical equipment:
Operating voltage: 3x400V / 50 Hz
Voltage tolerance: +/- 10%
Control voltage: 230V, AC / 24V, DC Rated current: 130 A
Supply: 70 mm2
Main fuse: 160 A
Management: Siemens SINUMERIC 840 D CONTROL PANEL: OP 12
MACHINE WEIGHT: 14,000 KG;
ATTENTION: The main spindle does not work and must be renewed or replaced. The cost of the renovation is around € 4000."
Machine data comply with data sheets and are without guarantee!
There will be no delivery. Assets are sold as is/where is. For your calculation please keep in mind the additional cost for removal, transportation, insurance and so on.
The reception of the offer will be awarded with reservation until the approval of the entitled party. - Orden de venta:
- NetBid GmbH (Austria)
*** Terminada *** Strojegradnja d.o.o. SAS 630 HSC CNC- Machining center
AtrásFormatos Oferta
Trading Premium- Cierre:
- 29/01/2021
12:00 - Ofertas existentes:
- 0 Pujas
- Estado
- Venta Cerrada
- Número de oferta:
- X13803-300
- Comisión
- 15,00%
CNC- Machining center
Número de oferta: X13803-300
Login
Usted debe haber iniciado la sesión para poder ultilizar esta función.
Ya no se puede pujar por este lote.
* La puja y el limite se consideran mas comision e IVA.
No se realiza ninguna entrega. En su cálculo, por favor, considere los gastos adicionales para el desmantelamiento, transporte, seguro, etc.
* La Pujas superiores a € 5.000 se aceptarán tan solo cuando se acompañen de un Certificado Bancario (que será aplicable a futuras subastas).
-
Detalles CNC- Machining center
-
Contacto
Mr Ales Weiksler (German, English, Slovenian und Serbian speaking)
Tel. +386 40 515 140
weiksler@netbid.com