- Producto
- Stork
- Modelo
- SX 6600-5600
- Año de construcción
- 1997
- Lugar
- 38228 Salzgitter, John-F.-Kennedy-Str. 50/ Produktionsgebäude/ Halle 1/ Spritzguss
- Descripción
- The acceptance of the bid is done with the consent of the owner.
SN X66501, clamping force 6,600 kN, tie bar spacing horizontal/vertical 900/900 mm, clamping platen horizontal/vertical 1,350/1,440 mm, mold installation height max./min. 900/300 mm, mold opening stroke 940 mm, total mold weight max. 8,600 kg, centering DS/AS 200/200 mm, crosshead thread M20, injection pressure 21.000 N/cm², injection volume 2.494 cm³, screw-Ø 84 mm, cascade 4-fold, core pulls, FAP/BAP 2/1, heating circuits Ma/PSG 8/12, connected load 330 kW, machine weight 34.300 kg, control, make Stork, type CDS500, handling linear robot, make Engel, type ERC 84/1-E, year 2003, SN 97606
Accessories: belt conveyor, belt width approx. 800 mm, L approx. 3,000 mm, belt conveyor, belt width approx. 800 mm, L approx. 6,000 mm, elevated, mobile, protective housing, hot runner control unit, make PSG, type RSL 98/16, year 1997, SN 749, 16-channel, temperature control unit (7), make. Regloplas, type 150KL/9/TP20/1K/RT22, SN 140962, nominal temperature 90°C, connected load 9.5 kW, temperature control unit (58), make Boe-Therm, type BT-120-09-D2-M4-V5, year 2016, SN 90298, nominal temperature 120°C, connected load 10.2 kW, temperature control unit (50), make Boe-Therm, type BT-120-09-G2-M4-V5, year 2016, SN 91488, nominal temperature 120°C, connected load 10.2 kW - Orden de venta:
- Angermann Machinery & Equipment GmbH & Co. KG
Stork SX 6600-5600 Injection molding machine - Surcharge under reserve
AtrásFormatos Oferta
Trading PremiumPuja actual*:
-
- Cierre:
- 27/05/2022
13:00 - Ofertas existentes:
- 0 Pujas
- Estado
- Venta Cerrada
- Número de oferta:
- X16329-60
- Comisión
- 18,00%
Injection molding machine - Surcharge under reserve
Número de oferta: X16329-60
Login
Usted debe haber iniciado la sesión para poder ultilizar esta función.
Recomendar
Acordar visita
Ya no se puede pujar por este lote.
* La puja y el limite se consideran mas comision e IVA.
No se realiza ninguna entrega. En su cálculo, por favor, considere los gastos adicionales para el desmantelamiento, transporte, seguro, etc.
* La Pujas superiores a € 5.000 se aceptarán tan solo cuando se acompañen de un Certificado Bancario (que será aplicable a futuras subastas).
-
Detalles Injection molding machine - Surcharge under reserve
-
Contacto
Thomas Schlieker, Tel. (+49) 040 355059-121, Email: schlieker@netbid.com
-
Pujas (0 Pujas)
Fecha Hora del día Oferta Licitador Anuncio expira