- Producto
- Stork
- Modelo
- ST-4000-660
- Año de construcción
- 1988
- Lugar
- 38228 Salzgitter, John-F.-Kennedy-Str. 50/ Produktionsgebäude/ Halle 1/ Spritzguss (Teambereich Halle 1)
- Descripción
- The acceptance of the bid is done with the consent of the owner.
SN 86621, clamping force 6,600 kN, tie bar spacing horizontal/vertical 900/900 mm mm, clamping platen horizontal/vertical 1,350/1,440 mm, mold installation height max./min. 900/300 mm, mold opening stroke 920 mm, total mold weight max. 8.5 t, centering DS/AS 200/205 mm, crosshead thread M24, injection pressure 15,000 N/cm², injection volume 2,640 cm³, screw-Ø 98 mm, core pulls FAP/BAP 0/2, heating circuits Ma/PSG 0/12, connected load 170 kW, machine weight 41.3 t, control system, make Stork, type CDS385, max. operating hours 154.998, max. operating time 1.5 hours Operating hours 154.998, linear unloading robot, make Engel, type ERC 65/0-E, year 2006, SN 159949, protective enclosure
Accessories: belt conveyor, belt width 1,200 mm, L 6,000 mm, elevated, mobile, hot runner control unit, make PSG, type RSL 98/16, year 1997, SN 734, connected load max. 57.6 kW, 16-channel, temperature control unit (12), make Regloplas, type 150KL/9/TS22/1K/RT22, SN 141138, temp. max. 90° C, connected load 10.1 kW, temperature control unit (26), make Regloplas, type 150KL/9/TS22/1K/RT22, SN 140363, temp. max. 90° C, connected load 9.5 kW, temperature control unit (6), make Regloplas, type 150KL/9/TS22/2K/RT45, SN 148716, temp. max. 90° C, connected load 10.1 kW - Realizar ofertas desde:
- EUR 5.900
- Orden de venta:
- Angermann Machinery & Equipment GmbH & Co. KG
Formatos Oferta
Auction PremiumPuja actual*:
EUR 5.900
- Precio de salida:
- EUR 5.900
- Precio mínimo:
- EUR 7.900
- Cierre:
- 24/05/2022
13:15 - Ofertas existentes:
- 1 Puja
- Estado
- subasta cerrada
- Número de oferta:
- X16329-90
- Comisión
- 18,00%
Injection molding machine - Surcharge under reserve
Número de oferta: X16329-90
Login
Usted debe haber iniciado la sesión para poder ultilizar esta función.
Recomendar
Acordar visita
* La puja y el limite se consideran mas comision e IVA.
No se realiza ninguna entrega. En su cálculo, por favor, considere los gastos adicionales para el desmantelamiento, transporte, seguro, etc.
* La Pujas superiores a € 5.000 se aceptarán tan solo cuando se acompañen de un Certificado Bancario (que será aplicable a futuras subastas).
-
Detalles Injection molding machine - Surcharge under reserve
-
Contacto
Thomas Schlieker, Tel. (+49) 040 355059-121, Email: schlieker@netbid.com
-
Pujas (1 Puja)
Fecha Hora del día Oferta Licitador 04/05/2022 20:03 5.900 WG1-yumewo