Stavelse UniBase Autoclave wood treatment for impregnating wood -NEW-

Producto

Stavelse UniBase

Año de construcción

2020

Lugar

4561 Baktalórántháza, Hungary

Descripción

Machine characteristics

• length of the pressure-resistant cylinder: 15 m
• height: 1.2m
• width: 1.2m
• operating pressure: 12 bar 

Connection 

• Voltage: 3 x 400 V 50 Hz + N + PE ± 5%
• Total installed power: 30,05 kW
• Grounding: < 10 Ohm

Cylinder

• Diameter: 1.80m
• Length: 15m
• Volume: ± 39,000 liters
• Material: sheet steel DIN 10 425 – thickness 14 mm
• Working pressure: between 0 and 12 bar
• Test pressure: 18 bar

 Storage tank and mixing tank

• Mixing tank: Volume: ± 8,000 l
• Treatment tank: Volume: ± 50,000 l

Other Machines and Accessoires

• 1 vacuum pump, mounted on a common support with a 15 kW motor.
• Hydraulic unit: 40 l hydraulic tank, 2.2 kW electric motor, 1 hydraulic pump
• Filters (1 filter in vacuum line, 1 filter in the pressure line, 1 grid inside the cylinder, 1 separator)
• Valves and pipes (all necessary valves pneumatically operated with electrical control)
• 1 Atlas Copco compressor with a 1.1 kW motor

PLC control Type: Schneider

Doors + safety ring

• 1 Stavelse Metaalbouw type hydraulic door, closed by a closing ring which is controlled by two cylinders.
• Safety pins against opening during the cycle.

Dimensions: Machine without bridge and rails: approx. 18,000 x 2,500 x 3,700 mm (LxHxW)

Machine weight: 33 tons

SN: 9QT360015020018

The machine is unused it was only installed at the location.

Realizar ofertas desde:

EUR 112.000

Orden de venta:

NetBid GmbH (Austria)

Aron Magyari (German, English, Hungarian speaking)

phone: +43 676 483 80 91

magyari@netbid.com