- Producent
- Stork
- Model
- SX 6600-5600
- Rok prod.
- 1997
- Miejsce postoju
- 38228 Salzgitter, John-F.-Kennedy-Str. 50/ Produktionsgebäude/ Halle 1/ Spritzguss
- Opis
- The acceptance of the bid is done with the consent of the owner.
SN X66501, clamping force 6,600 kN, tie bar spacing horizontal/vertical 900/900 mm, clamping platen horizontal/vertical 1,350/1,440 mm, mold installation height max./min. 900/300 mm, mold opening stroke 940 mm, total mold weight max. 8,600 kg, centering DS/AS 200/200 mm, crosshead thread M20, injection pressure 21.000 N/cm², injection volume 2.494 cm³, screw-Ø 84 mm, cascade 4-fold, core pulls, FAP/BAP 2/1, heating circuits Ma/PSG 8/12, connected load 330 kW, machine weight 34.300 kg, control, make Stork, type CDS500, handling linear robot, make Engel, type ERC 84/1-E, year 2003, SN 97606
Accessories: belt conveyor, belt width approx. 800 mm, L approx. 3,000 mm, belt conveyor, belt width approx. 800 mm, L approx. 6,000 mm, elevated, mobile, protective housing, hot runner control unit, make PSG, type RSL 98/16, year 1997, SN 749, 16-channel, temperature control unit (7), make. Regloplas, type 150KL/9/TP20/1K/RT22, SN 140962, nominal temperature 90°C, connected load 9.5 kW, temperature control unit (58), make Boe-Therm, type BT-120-09-D2-M4-V5, year 2016, SN 90298, nominal temperature 120°C, connected load 10.2 kW, temperature control unit (50), make Boe-Therm, type BT-120-09-G2-M4-V5, year 2016, SN 91488, nominal temperature 120°C, connected load 10.2 kW - Składanie ofert od:
- EUR 10 400
- Zlecenie:
- Angermann Machinery & Equipment GmbH & Co. KG
Typ oferty
Auction PremiumAktualna oferta:
EUR 13 800
- Cena startowa:
- EUR 10 400
- Cena minimalna:
- EUR 13 800
- Koniec aukcji:
- 2022-05-17
13:17 - Liczba ofert:
- 2 Oferty
- Status:
- Aukcja zakończona
- Numer oferty:
- X16329-60
- Prowizja
- 18,00%
Injection molding machine - Surcharge under reserve
Numer oferty: X16329-60
Zaloguj się
Zanim oddasz ofertę musisz się zalogować.
Udostępnij
Ustal termin oględzin
It is not possible to bid on this machine at this moment
* Oferta i limit będą powiększone o prowizję i podatek.
Oferta nie zawiera kosztów dostawy. W twojej kalkulacji dolicz dodatkowe koszty demontażu, transportu, ubezpieczenia, itp.
Oferty od 5.000 EUR wymagają potwierdzenia bankowego (dotyczy to również innych aukcji).
-
Szczegóły Injection molding machine - Surcharge under reserve
-
Kontakt
Thomas Schlieker, Tel. (+49) 040 355059-121, Email: schlieker@netbid.com
-
Oferty (2 Oferty)
Data godz. Oferta Oferent 2022-05-17 13:18 13 800 NM-bekuplast 2022-05-16 10:48 10 400 NM-bekuplast