AuktionVeraltet_Title_Prefix Stork ST-4000-660 Injection molding machine - Surcharge under reserve

Produkt

Stork

Tip

ST-4000-660

Letnik izdelave

1988

Opis

The acceptance of the bid is done with the consent of the owner.

SN 86621, clamping force 6,600 kN, tie bar spacing horizontal/vertical 900/900 mm mm, clamping platen horizontal/vertical 1,350/1,440 mm, mold installation height max./min. 900/300 mm, mold opening stroke 920 mm, total mold weight max. 8.5 t, centering DS/AS 200/205 mm, crosshead thread M24, injection pressure 15,000 N/cm², injection volume 2,640 cm³, screw-Ø 98 mm, core pulls FAP/BAP 0/2, heating circuits Ma/PSG 0/12, connected load 170 kW, machine weight 41.3 t, control system, make Stork, type CDS385, max. operating hours 154.998, max. operating time 1.5 hours Operating hours 154.998, linear unloading robot, make Engel, type ERC 65/0-E, year 2006, SN 159949, protective enclosure
Accessories: belt conveyor, belt width 1,200 mm, L 6,000 mm, elevated, mobile, hot runner control unit, make PSG, type RSL 98/16, year 1997, SN 734, connected load max. 57.6 kW, 16-channel, temperature control unit (12), make Regloplas, type 150KL/9/TS22/1K/RT22, SN 141138, temp. max. 90° C, connected load 10.1 kW, temperature control unit (26), make Regloplas, type 150KL/9/TS22/1K/RT22, SN 140363, temp. max. 90° C, connected load 9.5 kW, temperature control unit (6), make Regloplas, type 150KL/9/TS22/2K/RT45, SN 148716, temp. max. 90° C, connected load 10.1 kW

Verwertungsauftrag:

Angermann Machinery & Equipment GmbH & Co. KG

Thomas Schlieker, Tel. (+49) 040 355059-121, Email: schlieker@netbid.com