Detalhes
Tipo de Produto
HAAS
Tipo
VF-3SS
Ano de Construção
2011
Descrição
Maintenance report attached
Serial number: 1087916
Operating voltage: 360 - 480 V
Frequency: 50 - 60 Hz
Rated current: 70 A
Control unit: HAAS
Table dimensions: 1,200 x 480 mm
With 5 pcs. grooves
Rapid traverse in X, Y, Z-axis: 35.6 MpM
Feed rates in all three axes: 21.2 MpM
Tool holder: SK 40
Travel distances: X: approx. 1,016 mm, Y: approx. 508 mm, Z: approx. 635 mm
Incl. tool changer with 24 plus 1 magazine slots
Plus 5 additional SK 40 tool holders
Spindle running time: 6,722 h
Spindle speed 12,000 rpm
Switch-on time: 3,802 min
Number of tool changes: 266,958
Servo/motor running time: 60,159 min
Motion time: 7,283 min
Spindle speed: 12,000 rpm
Rapid traverse: up to 1,400 ipm (35.6 MpM)
IKZ available, synchronized tapping, 55 gallon cooling system (208 liters) with continuous coolant supply
Incl. integrated chip conveyor, coolant system from the manufacturer HAAS
Attention: the clamping systems on the clamping surface are not included in the scope of delivery
Machine can be started up without problems and referencing of the axes is OK
Low battery alarm
Batteries are replaced
According to alarm memory error 134
Spring assembly measured Tightening force of the spindle is measured at 1000 lbs. n.i.O. Should be 1600 - 2300 lbs., possibly the reason for error 134 and from the valve terminal
Spindle speed running no loud noises, slight speed fluctuations, could be due to the encoder, belt and sprockets sprockets are worn due to age
Cambox oil present i.O.
Several tool changes carried out i.O.
Axles can be moved i.O.
Slight running noises from the axles
Wiper from the waycover worn due to age.
Grease lubrication of the axles clogged as the machine has been standing for a long time.
Coolant system could not be tested as no coolant was available.
Tightening force of spring assembly n.i.O.
Slight speed fluctuations could be due to the encoder, belts and sprockets are also worn.
Grease lubrication of the axles clogged.
Wipers worn out.
Disassembly costs: 600,- €
These are incurred if dismantling/loading or the use of dismantling/loading aids is required. The invoice will be settled between you and the service provider on site.
Serial number: 1087916
Operating voltage: 360 - 480 V
Frequency: 50 - 60 Hz
Rated current: 70 A
Control unit: HAAS
Table dimensions: 1,200 x 480 mm
With 5 pcs. grooves
Rapid traverse in X, Y, Z-axis: 35.6 MpM
Feed rates in all three axes: 21.2 MpM
Tool holder: SK 40
Travel distances: X: approx. 1,016 mm, Y: approx. 508 mm, Z: approx. 635 mm
Incl. tool changer with 24 plus 1 magazine slots
Plus 5 additional SK 40 tool holders
Spindle running time: 6,722 h
Spindle speed 12,000 rpm
Switch-on time: 3,802 min
Number of tool changes: 266,958
Servo/motor running time: 60,159 min
Motion time: 7,283 min
Spindle speed: 12,000 rpm
Rapid traverse: up to 1,400 ipm (35.6 MpM)
IKZ available, synchronized tapping, 55 gallon cooling system (208 liters) with continuous coolant supply
Incl. integrated chip conveyor, coolant system from the manufacturer HAAS
Attention: the clamping systems on the clamping surface are not included in the scope of delivery
Machine can be started up without problems and referencing of the axes is OK
Low battery alarm
Batteries are replaced
According to alarm memory error 134
Spring assembly measured Tightening force of the spindle is measured at 1000 lbs. n.i.O. Should be 1600 - 2300 lbs., possibly the reason for error 134 and from the valve terminal
Spindle speed running no loud noises, slight speed fluctuations, could be due to the encoder, belt and sprockets sprockets are worn due to age
Cambox oil present i.O.
Several tool changes carried out i.O.
Axles can be moved i.O.
Slight running noises from the axles
Wiper from the waycover worn due to age.
Grease lubrication of the axles clogged as the machine has been standing for a long time.
Coolant system could not be tested as no coolant was available.
Tightening force of spring assembly n.i.O.
Slight speed fluctuations could be due to the encoder, belts and sprockets are also worn.
Grease lubrication of the axles clogged.
Wipers worn out.
Disassembly costs: 600,- €
These are incurred if dismantling/loading or the use of dismantling/loading aids is required. The invoice will be settled between you and the service provider on site.
Localização
- 73642 Welzheim
Termos do Leilão
Sale only to traders/dealers!
Highest bidder/ auction winner is requested to submit a copy of the business registration within 3 working days, otherwise the knockdown is considered canceled.
Any warranty/regulation in relation to this offer is expressly excluded.
The seller is also not liable for claims for damages - regardless of the legal basis; however, this does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or its vicarious agents or for injury to life, limb and health or essential contractual obligations.
Highest bidder/ auction winner is requested to submit a copy of the business registration within 3 working days, otherwise the knockdown is considered canceled.
Any warranty/regulation in relation to this offer is expressly excluded.
The seller is also not liable for claims for damages - regardless of the legal basis; however, this does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or its vicarious agents or for injury to life, limb and health or essential contractual obligations.
Pessoa de Contato
Auction Coordination Assistant
Christopher Lau
Partes desta página foram traduzidas automaticamente. O texto original em alemão se aplica.
A sua plataforma líder para compra e venda de máquinas e equipamentos industriais usados. Descubra milhares de leilões online, e as melhores oportunidades do mercado. O seu parceiro de confiança na avaliação e comercialização de máquinas e bens móveis.
Os nossos especialistas estão ao seu dispor. Contacte-nos pelo +351 912 800 221 ou carrico@netbid.com.