Detalhes
Tipo de Produto
HAAS
Tipo
VF-4SS
Ano de Construção
2017
Descrição
Maintenance report attached
Serial number: 1145075
Operating voltage: 440 V
Frequency: 50-60 Hz
Rated current: 33 A
Control unit: HAAS
Table dimensions: 1,300 x 520 mm
With 5 pcs. grooves
Attention: The clamping systems on the clamping table are not included in the scope of delivery
Travel distances: X: approx. 1,270 mm, Y: approx. 508 mm, Z: approx. 635 mm
SK40 spindle
Spindle running time: 0 h
Spindle speed: 12,000 rpm
Switch-on time: 4 min
Number of tool changes: 0
Servo/motor running time: 1 min
Motion time: 0 min
Inline direct drive, laterally arranged high-speed tool changer with 24 plus 1 magazine positions
Rapid traverse in X, Y, Z-axis: 35.6 MpM
Working feeds: 21.2 MpM
Tool holder: SK 40, incl. 24-position tool changer, plus 3 SK 40 tool holders
Consisting of a RENISHAW 3D measuring probe and an integrated chip conveyor as well as a coolant system from the manufacturer HAAS
IKZ available, power failure detection module, synchronized tapping
55 gallon cooling system (208 liters) with continuous coolant supply
Defective maincon removed and new part installed
Then tried to install original software
Without success. Contact with Haas Belgium
Updated with the latest software
Subsequently problems with activation
Downgrade to software 100.24.000.1111
Machine can be activated
Haas backup from Usb stick damaged, cannot be used
Standard setrings entered manually
GEO location entered
Spindle orientation and offset WZ change arm reset. 4 and 5 axis activated
Error with axis 5, servo axis error too large
Troubleshooting carried out
Air disconnected and reconnected
Plug connections checked
Subsequent reference run, everything OK
Several tool changes carried out, also OK
The axes all move correctly
Machine handed over to customer in o.k. handed over in good condition
Disassembly costs: €1,000
These are incurred if disassembly/loading or the use of disassembly/loading aids is required. Settlement will be made between you and the service provider on site.
Serial number: 1145075
Operating voltage: 440 V
Frequency: 50-60 Hz
Rated current: 33 A
Control unit: HAAS
Table dimensions: 1,300 x 520 mm
With 5 pcs. grooves
Attention: The clamping systems on the clamping table are not included in the scope of delivery
Travel distances: X: approx. 1,270 mm, Y: approx. 508 mm, Z: approx. 635 mm
SK40 spindle
Spindle running time: 0 h
Spindle speed: 12,000 rpm
Switch-on time: 4 min
Number of tool changes: 0
Servo/motor running time: 1 min
Motion time: 0 min
Inline direct drive, laterally arranged high-speed tool changer with 24 plus 1 magazine positions
Rapid traverse in X, Y, Z-axis: 35.6 MpM
Working feeds: 21.2 MpM
Tool holder: SK 40, incl. 24-position tool changer, plus 3 SK 40 tool holders
Consisting of a RENISHAW 3D measuring probe and an integrated chip conveyor as well as a coolant system from the manufacturer HAAS
IKZ available, power failure detection module, synchronized tapping
55 gallon cooling system (208 liters) with continuous coolant supply
Defective maincon removed and new part installed
Then tried to install original software
Without success. Contact with Haas Belgium
Updated with the latest software
Subsequently problems with activation
Downgrade to software 100.24.000.1111
Machine can be activated
Haas backup from Usb stick damaged, cannot be used
Standard setrings entered manually
GEO location entered
Spindle orientation and offset WZ change arm reset. 4 and 5 axis activated
Error with axis 5, servo axis error too large
Troubleshooting carried out
Air disconnected and reconnected
Plug connections checked
Subsequent reference run, everything OK
Several tool changes carried out, also OK
The axes all move correctly
Machine handed over to customer in o.k. handed over in good condition
Disassembly costs: €1,000
These are incurred if disassembly/loading or the use of disassembly/loading aids is required. Settlement will be made between you and the service provider on site.
Localização
- 73642 Welzheim
Termos do Leilão
Sale only to traders/dealers!
Highest bidder/ auction winner is requested to submit a copy of the business registration within 3 working days, otherwise the knockdown is considered canceled.
Any warranty/regulation in relation to this offer is expressly excluded.
The seller is also not liable for claims for damages - regardless of the legal basis; however, this does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or its vicarious agents or for injury to life, limb and health or essential contractual obligations.
Highest bidder/ auction winner is requested to submit a copy of the business registration within 3 working days, otherwise the knockdown is considered canceled.
Any warranty/regulation in relation to this offer is expressly excluded.
The seller is also not liable for claims for damages - regardless of the legal basis; however, this does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or its vicarious agents or for injury to life, limb and health or essential contractual obligations.
Pessoa de Contato
Auction Coordination Assistant
Christopher Lau
Partes desta página foram traduzidas automaticamente. O texto original em alemão se aplica.
A sua plataforma líder para compra e venda de máquinas e equipamentos industriais usados. Descubra milhares de leilões online, e as melhores oportunidades do mercado. O seu parceiro de confiança na avaliação e comercialização de máquinas e bens móveis.
Os nossos especialistas estão ao seu dispor. Contacte-nos pelo +351 912 800 221 ou carrico@netbid.com.