Detalhes
Tipo de Produto
HAAS
Tipo
UMC-750
Ano de Construção
2014
Descrição
Maintenance report attached
Serial number: 1114397
Operating voltage: 354 - 488 V
Frequency: 50-60 Hz
Rated current: 70 A
Control unit: HAAS
Tool holder: SK 40
Travel distances: X: approx. 762 mm, Y: approx. 508 mm, Z: approx. 508 mm
Incl. swivel rotary table (B- and C-axis)
Table dimensions: 600 x 500 mm
Integrated 500 mm 2-axis rotary and swivel table
SK40 spindle
Spindle running time: 7,713 h
Spindle speed: 12,000 rpm
Switch-on time: 22,829 min
Number of tool changes: 195,058
Servo/motor running time: 62,861 min
Motion time: 7,794 min
Inline direct drive, laterally arranged tool changer with 40 plus 1 magazine positions
Rapid traverse in all three axes 25.4 MpM
Spindle orientation macros, coordinate rotation and scaling
IKZ available
Working feeds 16.5 MpM
With 7 grooves, incl. 40-fold tool changer, one chip conveyor, one coolant system
Incl. RENISHAW 3D measuring probe
Machine can be switched on and referenced without any problems
Low battery message appears
All data available
Batteries are replaced
Axes can be moved without problems i.O.
Tightening force of the spindle n.i.O. is at 1550lbs. Should be at 1600-2300lbs.
Brake pressure of the B-axis is there
B-axis oil present is OK
C-axle oil must be refilled at the rear is at the minimum
Grease lubrication of the axles is clogged
Several tool changes carried out i.O.
Speed fluctuations come from the encoder, belts and pinions worn due to age
No loud noises at spindle speed
Backlash in all axes
Disassembly costs: €1,500
These are incurred if disassembly/loading or the use of disassembly/loading aids is required. The invoice will be settled between you and the service provider on site.
Serial number: 1114397
Operating voltage: 354 - 488 V
Frequency: 50-60 Hz
Rated current: 70 A
Control unit: HAAS
Tool holder: SK 40
Travel distances: X: approx. 762 mm, Y: approx. 508 mm, Z: approx. 508 mm
Incl. swivel rotary table (B- and C-axis)
Table dimensions: 600 x 500 mm
Integrated 500 mm 2-axis rotary and swivel table
SK40 spindle
Spindle running time: 7,713 h
Spindle speed: 12,000 rpm
Switch-on time: 22,829 min
Number of tool changes: 195,058
Servo/motor running time: 62,861 min
Motion time: 7,794 min
Inline direct drive, laterally arranged tool changer with 40 plus 1 magazine positions
Rapid traverse in all three axes 25.4 MpM
Spindle orientation macros, coordinate rotation and scaling
IKZ available
Working feeds 16.5 MpM
With 7 grooves, incl. 40-fold tool changer, one chip conveyor, one coolant system
Incl. RENISHAW 3D measuring probe
Machine can be switched on and referenced without any problems
Low battery message appears
All data available
Batteries are replaced
Axes can be moved without problems i.O.
Tightening force of the spindle n.i.O. is at 1550lbs. Should be at 1600-2300lbs.
Brake pressure of the B-axis is there
B-axis oil present is OK
C-axle oil must be refilled at the rear is at the minimum
Grease lubrication of the axles is clogged
Several tool changes carried out i.O.
Speed fluctuations come from the encoder, belts and pinions worn due to age
No loud noises at spindle speed
Backlash in all axes
Disassembly costs: €1,500
These are incurred if disassembly/loading or the use of disassembly/loading aids is required. The invoice will be settled between you and the service provider on site.
Localização
- 73642 Welzheim
Termos do Leilão
Sale only to traders/dealers!
Highest bidder/ auction winner is requested to submit a copy of the business registration within 3 working days, otherwise the knockdown is considered canceled.
Any warranty/regulation in relation to this offer is expressly excluded.
The seller is also not liable for claims for damages - regardless of the legal basis; however, this does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or its vicarious agents or for injury to life, limb and health or essential contractual obligations.
Highest bidder/ auction winner is requested to submit a copy of the business registration within 3 working days, otherwise the knockdown is considered canceled.
Any warranty/regulation in relation to this offer is expressly excluded.
The seller is also not liable for claims for damages - regardless of the legal basis; however, this does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or its vicarious agents or for injury to life, limb and health or essential contractual obligations.
Pessoa de Contato
Auction Coordination Assistant
Christopher Lau
Partes desta página foram traduzidas automaticamente. O texto original em alemão se aplica.
A sua plataforma líder para compra e venda de máquinas e equipamentos industriais usados. Descubra milhares de leilões online, e as melhores oportunidades do mercado. O seu parceiro de confiança na avaliação e comercialização de máquinas e bens móveis.
Os nossos especialistas estão ao seu dispor. Contacte-nos pelo +351 912 800 221 ou carrico@netbid.com.