Parte do Leilão Closure of a toolmaker
CNC vertical machining center HAAS SMINIMILL HE
Leilão #18632-45
Detalhes
Tipo de Produto
HAAS
Tipo
SMINIMILL HE
Ano de Construção
2003
Descrição
Maintenance report attached
Spindle running time: 3,235 h
Switch-on time: 18,195 min
Number of tool changes: 306,139
Servo/motor running time: 16,519 min
Motion time: 3,452 min
Serial number: 32345
Operating voltage: 360-460 V
Frequency: 50-60 Hz
Rated current: 35 A
Control unit: HAAS
Tool holder: SK 40
Incl. 8-fold tool changer
Table dimensions: 730 x 300 mm
With 3 pcs. grooves
Attention: without the machine vice located on the clamping surface
Travel distances: X: approx. 300 mm, Y: approx. 300 mm, Z: approx. 300 mm
Inspection of the machine carried out
Machine can be switched on and all axes referenced without any problems
Buffer batteries measured at 3.28v are OK
Lubrication checked is OK
Lubrication pressure checked manually drops within the prescribed time OK
Spindle speed left running no loud noises detectable i.O.
Several tool changes carried out i.O.
Tightening force of the spindle is at 1000 lbs. Should be around 800-1400 lbs.
Coolant no longer in the tank
Coolant system such as pumps, P-Cool could not be tested
Waycover and wiper worn due to age
X, Z and Y axes have backlash and running noises
Encoder belt, encoder pinion and drive belt worn and rubber buffer worn for tensioning the drive belt
There are no error messages when moving the axes
Parts such as belts and pinions are worn due to age Backlash in all axles and running noises
Waycover and wiper worn due to age
Backup pulled for customers
Disassembly costs: €250
These are incurred if dismantling/loading or the use of dismantling/loading aids is required. Invoicing takes place between you and the service provider on site.
Spindle running time: 3,235 h
Switch-on time: 18,195 min
Number of tool changes: 306,139
Servo/motor running time: 16,519 min
Motion time: 3,452 min
Serial number: 32345
Operating voltage: 360-460 V
Frequency: 50-60 Hz
Rated current: 35 A
Control unit: HAAS
Tool holder: SK 40
Incl. 8-fold tool changer
Table dimensions: 730 x 300 mm
With 3 pcs. grooves
Attention: without the machine vice located on the clamping surface
Travel distances: X: approx. 300 mm, Y: approx. 300 mm, Z: approx. 300 mm
Inspection of the machine carried out
Machine can be switched on and all axes referenced without any problems
Buffer batteries measured at 3.28v are OK
Lubrication checked is OK
Lubrication pressure checked manually drops within the prescribed time OK
Spindle speed left running no loud noises detectable i.O.
Several tool changes carried out i.O.
Tightening force of the spindle is at 1000 lbs. Should be around 800-1400 lbs.
Coolant no longer in the tank
Coolant system such as pumps, P-Cool could not be tested
Waycover and wiper worn due to age
X, Z and Y axes have backlash and running noises
Encoder belt, encoder pinion and drive belt worn and rubber buffer worn for tensioning the drive belt
There are no error messages when moving the axes
Parts such as belts and pinions are worn due to age Backlash in all axles and running noises
Waycover and wiper worn due to age
Backup pulled for customers
Disassembly costs: €250
These are incurred if dismantling/loading or the use of dismantling/loading aids is required. Invoicing takes place between you and the service provider on site.
Localização
- 73642 Welzheim
Termos do Leilão
Sale only to traders/dealers!
Highest bidder/ auction winner is requested to submit a copy of the business registration within 3 working days, otherwise the knockdown is considered canceled.
Any warranty/regulation in relation to this offer is expressly excluded.
The seller is also not liable for claims for damages - regardless of the legal basis; however, this does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or its vicarious agents or for injury to life, limb and health or essential contractual obligations.
Highest bidder/ auction winner is requested to submit a copy of the business registration within 3 working days, otherwise the knockdown is considered canceled.
Any warranty/regulation in relation to this offer is expressly excluded.
The seller is also not liable for claims for damages - regardless of the legal basis; however, this does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or its vicarious agents or for injury to life, limb and health or essential contractual obligations.
Pessoa de Contato
Auction Coordination Assistant
Christopher Lau
Partes desta página foram traduzidas automaticamente. O texto original em alemão se aplica.
A sua plataforma líder para compra e venda de máquinas e equipamentos industriais usados. Descubra milhares de leilões online, e as melhores oportunidades do mercado. O seu parceiro de confiança na avaliação e comercialização de máquinas e bens móveis.
Os nossos especialistas estão ao seu dispor. Contacte-nos pelo +351 912 800 221 ou carrico@netbid.com.