Part of the Auction Closure of a toolmaker
CNC vertical machining center HAAS VF-4SS
Auction #18632-20
This auction has ended.
Details
Product Type
HAAS
Type
VF-4SS
Construction Year
2017
Description
Maintenance report attached
Serial number: 1145075
Operating voltage: 440 V
Frequency: 50-60 Hz
Rated current: 33 A
Control unit: HAAS
Table dimensions: 1,300 x 520 mm
With 5 pcs. grooves
Attention: The clamping systems on the clamping table are not included in the scope of delivery
Travel distances: X: approx. 1,270 mm, Y: approx. 508 mm, Z: approx. 635 mm
SK40 spindle
Spindle running time: 0 h
Spindle speed: 12,000 rpm
Switch-on time: 4 min
Number of tool changes: 0
Servo/motor running time: 1 min
Motion time: 0 min
Inline direct drive, laterally arranged high-speed tool changer with 24 plus 1 magazine positions
Rapid traverse in X, Y, Z-axis: 35.6 MpM
Working feeds: 21.2 MpM
Tool holder: SK 40, incl. 24-position tool changer, plus 3 SK 40 tool holders
Consisting of a RENISHAW 3D measuring probe and an integrated chip conveyor as well as a coolant system from the manufacturer HAAS
IKZ available, power failure detection module, synchronized tapping
55 gallon cooling system (208 liters) with continuous coolant supply
Defective maincon removed and new part installed
Then tried to install original software
Without success. Contact with Haas Belgium
Updated with the latest software
Subsequently problems with activation
Downgrade to software 100.24.000.1111
Machine can be activated
Haas backup from Usb stick damaged, cannot be used
Standard setrings entered manually
GEO location entered
Spindle orientation and offset WZ change arm reset. 4 and 5 axis activated
Error with axis 5, servo axis error too large
Troubleshooting carried out
Air disconnected and reconnected
Plug connections checked
Subsequent reference run, everything OK
Several tool changes carried out, also OK
The axes all move correctly
Machine handed over to customer in o.k. handed over in good condition
Disassembly costs: €1,000
These are incurred if disassembly/loading or the use of disassembly/loading aids is required. Settlement will be made between you and the service provider on site.
Serial number: 1145075
Operating voltage: 440 V
Frequency: 50-60 Hz
Rated current: 33 A
Control unit: HAAS
Table dimensions: 1,300 x 520 mm
With 5 pcs. grooves
Attention: The clamping systems on the clamping table are not included in the scope of delivery
Travel distances: X: approx. 1,270 mm, Y: approx. 508 mm, Z: approx. 635 mm
SK40 spindle
Spindle running time: 0 h
Spindle speed: 12,000 rpm
Switch-on time: 4 min
Number of tool changes: 0
Servo/motor running time: 1 min
Motion time: 0 min
Inline direct drive, laterally arranged high-speed tool changer with 24 plus 1 magazine positions
Rapid traverse in X, Y, Z-axis: 35.6 MpM
Working feeds: 21.2 MpM
Tool holder: SK 40, incl. 24-position tool changer, plus 3 SK 40 tool holders
Consisting of a RENISHAW 3D measuring probe and an integrated chip conveyor as well as a coolant system from the manufacturer HAAS
IKZ available, power failure detection module, synchronized tapping
55 gallon cooling system (208 liters) with continuous coolant supply
Defective maincon removed and new part installed
Then tried to install original software
Without success. Contact with Haas Belgium
Updated with the latest software
Subsequently problems with activation
Downgrade to software 100.24.000.1111
Machine can be activated
Haas backup from Usb stick damaged, cannot be used
Standard setrings entered manually
GEO location entered
Spindle orientation and offset WZ change arm reset. 4 and 5 axis activated
Error with axis 5, servo axis error too large
Troubleshooting carried out
Air disconnected and reconnected
Plug connections checked
Subsequent reference run, everything OK
Several tool changes carried out, also OK
The axes all move correctly
Machine handed over to customer in o.k. handed over in good condition
Disassembly costs: €1,000
These are incurred if disassembly/loading or the use of disassembly/loading aids is required. Settlement will be made between you and the service provider on site.
Location
- 73642 Welzheim
Dates
Inspection
Please register in advance at lau@netbid.com
Pickup
Tue, 17.06.2025 - Fri, 20.06.2025
09:00 - 16:00
Tue, 17.06.2025 - Thu, 19.06.2025
08:00 - 15:00
Loading of the machines is only possible on these days after prior arrangement. Please refer to the corresponding items for the respective prices.
Auction Terms
Sale only to traders/dealers!
Highest bidder/ auction winner is requested to submit a copy of the business registration within 3 working days, otherwise the knockdown is considered canceled.
Any warranty/regulation in relation to this offer is expressly excluded.
The seller is also not liable for claims for damages - regardless of the legal basis; however, this does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or its vicarious agents or for injury to life, limb and health or essential contractual obligations.
Highest bidder/ auction winner is requested to submit a copy of the business registration within 3 working days, otherwise the knockdown is considered canceled.
Any warranty/regulation in relation to this offer is expressly excluded.
The seller is also not liable for claims for damages - regardless of the legal basis; however, this does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or its vicarious agents or for injury to life, limb and health or essential contractual obligations.
Contact Person
Auction Coordination Assistant
Christopher Lau
Parts of this page have been machine translated. The German original text applies.
Your individual consultation
Our experts will be happy to advise you. Call +49 40 355059-132 or write to service@netbid.com