- manufacturer
- IMTECH Deutschland GmbH & Co KG
- Type
- 1/HSN7451-60Y-40P
- Manufacture Date
- 2008
- Description
- Environmental conditions
Temperature max. 30 ° C
rel. Humidity max. 40%
Temperature / climatic working range -Temperature range - 40 ° C to + 90 ° C
- Climate work area + 15 ° C to + 90 ° C
- Humidity range 30% - 95% r. F. (max. Dew point + 50 ° C)
- control accuracy
- Temperature +/- 2 K over time
- humidity +/- 2% r. F.
chamber
External dimensions approx. W: 5820 x D: 9200 x H: 4320 (mm)
Insulation thickness 160 mm
circulating air
Volume flow approx. 15000 m³ / h
Heating capacity 50 kW
Cooling capacity approx. 28.0 kW at Tr -40 ° C
Humidification
Humidifier output approx. 25 kg / h
Media supply
Electrical feed 400 / 230V, +/- 10%, 50Hz, 3Ph, SL, N
With these parts:
01.I screw compressor Bitzer HSN 7451-60 screw compressor Bitzer HSN 7451-60
01.II Pressure station manometer Johnson P78PLM-9350
01.III Oilsystem Bitzer OA 1854 18 liters
01.IV ECO plate heat exchanger AC50-46HX + Exp. Valve
01.V condenser K1973T-2 + Hansa USV 28 bar
01.VI collector F1052T + Hansa USV 28 bar
01.VII filter Alco ADKS-9611-T
01.VIII hot gas bypass AlcoX7428-2 + solenoid valve EVR-NC 22mm
01.IX post-ice injection valve Alco XB1019 GL-2B + EVR10-NC 12 mm + Danfoss GBC 22S
01.X suction line
01.XI injection station UML
01.XII injection station brine heat exchanger CB76-40H + Alco EX6-M21
I.13 E. De-humidification
I.14 Cooling water circuit for KAE
I.15 Sensor technology
I.16 Coolant R507a
01.II secondary circuit
I.21 SEK-UML plate evaporator, pump, butterfly valve DN32, manometer 0-6 bar, G1 / 2 "A, PT100 50mm, flow sensor, automatic quick air vent 1/2", ball valve 1/2 "IG, membrane pressure expansion vessel, Tyfocor
02.II test room 8880 * 5500 * 4000 mm
2-leaf Door (frame heating, central heating) 2400 * 2300
1flg. Door 900 * 2000
Door window 600 * 800
Door window 300 * 500
Feedthroughs, heated pressure equalization, CO2 flap, ramp, partition
500 W halogen spotlight
Emergency call facility
emergency lighting
Safety devices differential pressure switch + / -
Limiter ESTI
Sockets only exist in technical documentation
02.III dehumidifier
Air temperature monitoring
Purge air fan 3600 m3 / h
Engine shut-off valve
02.IV circulating air fan (bad technical doc., Manufacturer unknown)
Evaporator
Brine circuit
Heating circulating air
Heating bath
Heat exchanger frame
02.V humidification fan (bad technical doc., Manufacturer unknown)
Steam food
Steam pipe
3 gas warning system box
CO sensor
HC sensor
Control module MSA
Alarm Visual / Audible
ALCO pressure transmitter PT4 2005_07
ALCO electr. ExVentil EX5 ... 8 BA 2007_06
ALCO filter drier housing ADKS FDS 2004_05
ALCO heating gas regulator CPHE _ACP 2002_06
ALCO sight glass AMI BA 2004_05
ALCO temperature sensor ECN-C60
ALCO thermal expansion valve T_BA 2004_01
ALCO overheating controller display unit ECD-002
ALCO overheating controller EC3-X33
Alfa Laval plate heat exchanger AC
Alfa Laval plate heat exchanger CB NEW
Alfa Laval heat exchangers CB + NB
ARI-GESA butterfly valve_eng
LE-data sheet-17-11
Bitzer Kriwan INT69VSY-II_deu
Bitzer collector oil separator DB-300-4
Bitzer screw compressor SB-100-5
Bitzer st-610-2 Eco
Bitzer condenser DB-200-3
Danfoss AVTA
Danfoss CPCE & LG_deu
Danfoss CVP + CVPP
Danfoss EVR 2-40 NC_NO eng
Danfoss EVR2-22 2006_11
Danfoss GBC eng
Danfoss GBC Inst
Danfoss GBC
Danfoss KP 61-81 1998_11
Danfoss KP_KPI eng NEW
Danfoss NRV_NRVH_deu
Danfoss PM 1
Danfoss_Kit
Danfoss_kit2
Signal transmitter
Electrotherm Typ200 eng
Electrotherm Typ372 eng
Electrotherm TypK eng
Electrotherm accessories and measuring transducers> Esti 01 switch SK10 eng
Esti 02 general information eng
Esti 03 cartridge eng
Esti 04 cartridge insert
Fischer emergency alarm eng
Flamco ContraFlex expansion vessel
Flamco safety valve CESV
Frigorechnik_Screw connection
PJV082155ES1
PJV082155SC_Revision
Hansa valves SV eng
Hansa shuttle valve eng
IFM SI5000 eng replacement for SI1000
Johnson P77 eng
Johnson P77 NEW 007
Johnson P78PLM NEW 005
Johnson p499
Johnson V46 NEW
Keller transmitter series 21 R eng
KSB pump Etabloc BA eng
KSB pump Etabloc technology eng
LAE PT100
Maico_1
Maico_2
Maico_3
Maico_4
Maico_5
Maico_6
MSA DF 9200 (D) B.u.W instructions
MSA gas detector 47K
MSA control system BUW9020d0804
Murrelektronik connector system_deu
Rotronic Hygroclip eng
Rotronic Hygroflex Operating Instructions_V_4.0_eng
RZB_Light Box Midi
RZB_Light Box Midi MA
Schimanski switch DL --- K BA
Schimanski switch DL --- K
- by order of:
- NetBid GmbH (Austria)
*** ended *** IMTECH Deutschland GmbH & Co KG 1/HSN7451-60Y-40P Climate chamber
PreviousAuction Type
Auction Premium- ends:
- 13/10/2020
10:01 - number of bids:
- 2 Bids
- Status:
- Auction closed
- Item no.:
- X16171-001
- surcharge
- 15.00%
Climate chamber
Item no.: X16171-001
login
You must be logged in to use this functionality.
It is not possible to bid on this machine at this moment
* Bids and limits plus commission and vat
There will be no delivery. Assets are sold as is/where is. For your calculation please keep in mind the additional cost for removal, transportation, insurance and so on.
* Bids over € 5.000 are accepted with Bank Certificate (this also applies to further auctions).
-
Details Climate chamber
-
Contact
Jan Antonin (German, English, Czech speaking)
M: (+420) 773 445 221
antonin@netbid.cz -
Conditions
Please note:
1) The buyer also pays a VAT advance from an EU member state.
2) For a period of one year from the transfer of ownership to the buyer, the buyer is entitled to resell the object of purchase to a third party only with the written consent of the seller.
4) The buyer is obliged to discuss all modifications of the purchase contract by terminating the auction. Contact will be communicated upon request 5) Loading and removal of equipment is possible only within the reserved dates specified in the description for individual auction items.
6) Offline bids must be submitted no later than 24 hours before the end of the auction. 7) The seller reserves the right to check the integrity of the buyer, which is usually around 10 days.