- Fabrikant
- Myrton
- Type
- HSM-85A
- Beschrijving
- Technical data:
X movement: 850 mm
Y-movement: 650 mm
Z-movement: 600 mm
Space between the spindle and the table level: 165 ~ 765mm
T-groove: 18 mm
Table capacity 800kg
Desktop-size: 1.300 x 600 mm
Max. spindle rotation number: eingebaute Option: 15000 rot / min
Spindle: BT 40
Spindle drive: built in option: direct
Main engine capacity: min. 10 kW
Torque of the working spindle: min. 63,7 Nm
Rapid traverse X-, Y- and Z-axis min. 20.000 mm / min
Track forward feed: 10000 mm / min
Tool magazine: built in option: 24 tool places
ATC-Type: built in option: Gear shift
Standard accessories
Engineering"Pyramide"
German clutches
CE-certificate for electrical components
German TÜV CE certificate
Italian pneumatic system
Pneumatic- / Hydraulic cylinder for latching/ unlatching of the tools
Heat exchanger for the control cabinet
Telescopic protection for X / Y / Z-ball screw drive
3 manual cooling water outlets on the spindle
Blower from the spindle during tool change
Air inlet on the spindle for air cooled cutting
High volume cooling water tank
Working room lamp
Control light for three colour modes
RS-232 C-interface
Automatic shut-off
Fixed knocking
4 litre central lubrication system (High pressure)
Completely enclosed work space with door protection
Known defects
X- and Y-slides have to be renewed
The engine of the spindle’s cooling system has to either be renewed or replaced.
Machine data comply with data sheets and are without guarantee! - In opdracht van:
- NetBid GmbH (Austria)
*** Afgewerkt *** Myrton HSM-85A Machining centre with Heidenhain-controlling
VorigeVeiling Type
Trading Premium- Sluiting :
- 30-1-2020
10:10 - Aantal biedingen:
- 1 bod
- Status:
- Biedproces gesloten.
- Projectnummer:
- V15288-F001 (X15321-1)
- Veilingkosten
- 15,00%
Machining centre with Heidenhain-controlling
Projectnummer: V15288-F001 (X15321-1)
Log in
U moet zijn aangemeld om deze functie te gebruiken.
Momenteel kunt u niet op dit lot bieden
* Uw biedingen en limieten worden vermeerderd met veilingkosten en BTW
Goederen worden niet bezorgd. Goederen worden voetstoots verkocht. Houd bij uw berekeningen rekening met de kosten voor demontage, transport, verzekering
* Biedingen hoger dan € 5.000 worden geaccepteerd met Bank Certificaat (dit is ook van toepassingen op latere veilingen).
-
Details Machining centre with Heidenhain-controlling