- Fabrikant
- Strojegradnja d.o.o.
- Type
- SAS 630 HSC
- Bouwjaar
- 2007
- Beschrijving
- CNC Machining center for making various aluminum castings.
Working range: X-axis: 700 mm, Y-axis: 630 mm, Z-axis: 550 mm;
Swivel pallet table: 360,000 x 0.001;
Motor spindle: GNM HSC 240-24000 / 18 HSK A63R;
Motor-spindle with increased speed;
Max drive power at 100% / 40%: 18/23 kW;
Power: 20-24,000 / min-1;
Max torque at 100% / 40%: 61/81 Nm;
Spindle bearing type: Hybrid;
Inner bearing diameter: 70 mm;
Dynamics: X, Y, and Z-axis acceleration: 8 m / s2;
Path measurement: - X, Y, and Z-axes absolute measurement system for reading accuracy: 0.001 mm
- B-axis absolute measuring system for angle measurement, on the axis of the turntable, company Heidenhain.
Electrical equipment:
Operating voltage: 3x400V / 50 Hz
Voltage tolerance: +/- 10%
Control voltage: 230V, AC / 24V, DC Rated current: 130 A
Supply: 70 mm2
Main fuse: 160 A
Management: Siemens SINUMERIC 840 D CONTROL PANEL: OP 12
MACHINE WEIGHT: 14,000 KG;
ATTENTION: The main spindle does not work and must be renewed or replaced. The cost of the renovation is around € 4000."
Machine data comply with data sheets and are without guarantee!
There will be no delivery. Assets are sold as is/where is. For your calculation please keep in mind the additional cost for removal, transportation, insurance and so on.
The reception of the offer will be awarded with reservation until the approval of the entitled party. - In opdracht van:
- NetBid GmbH (Austria)
*** Afgewerkt *** Strojegradnja d.o.o. SAS 630 HSC CNC- Machining center
VorigeVeiling Type
Trading Premium- Sluiting :
- 29-1-2021
12:00 - Aantal biedingen:
- 0 Biedingen
- Status:
- Biedproces gesloten.
- Projectnummer:
- X13803-300
- Veilingkosten
- 15,00%
CNC- Machining center
Projectnummer: X13803-300
Log in
U moet zijn aangemeld om deze functie te gebruiken.
Momenteel kunt u niet op dit lot bieden
* Uw biedingen en limieten worden vermeerderd met veilingkosten en BTW
Goederen worden niet bezorgd. Goederen worden voetstoots verkocht. Houd bij uw berekeningen rekening met de kosten voor demontage, transport, verzekering
* Biedingen hoger dan € 5.000 worden geaccepteerd met Bank Certificaat (dit is ook van toepassingen op latere veilingen).
-
Details CNC- Machining center
-
Contact
Mr Ales Weiksler (German, English, Slovenian und Serbian speaking)
Tel. +386 40 515 140
weiksler@netbid.com