- Produkt
- Pinnacle
- Tip
- VMC650
- Letnik izdelave
- 2012
- Opis
- Serial No.: 3P11223L4
Run time: 6255 h - Please consider: machine in operating state.
Net Weight: 4500 Kgs
Capacity: 20 KVA
Max. RPM: 8000
Power: 3 ~ 400V 50Hz
TABLE:
Table size (mm): 800 x 510
Travel Ranges (X x Y x Z mm): 650 x 560 x 560
Max. Table Load (kgs): 600
Spindle Nose to Table Surface (mm): 100~660
T-slot (Width x Distance x Number mm): 18 x 100 x 5
SPINDLE:
Tool Shank & Pull Stud: ISO40
Spindle Inner Diameter (mm): 70
Spindle Center to Column (mm): 600
Spindle Speed (rpm) Belt: 60~8000 (10,000)
Spindle Speed (rpm) Gear: L40~2000, H2001~8000
Spindle Speed (rpm) Direct-Drive: 12000
Draw Bar Force (kgf): 950
Main Motor (con/30 min Kw): 5.5 / 7.5
FEED RATE:
Rapid Feed Rate (X x Y x Z m/min): 30 / 30 / 24
Feed Rate (X x Y x Z m/min): 10000
AXIS SERVOMOTOR:
Fanuc (Kw): β 22/2,000 i (2.5) or α 12/3,000 i (3.0)
AUTO TOOL CHANGER:
ATC Type: PLATE / DISK
Cam Type: GENOVA / DAUL ARM
Tool Selection (Bi-direction): ABSOLUTE / RANDOM
Tool Storage Capacity (PCs): 20 / 20
Max. Tool Diameter (mm): 100 / 93
Max. Tool Length (mm), Weight (kgs): 250 , 8
MISCELLANEOUS:
Air Requirement (Kg / cm²): 6
Voltage: 220
Power Requirement (KVA): 15
Coolant Tank Capacity (L): 200
Machine Weight (Kgs): 4500
Machine Height (mm): 2650
Floor Space (L x W mm): 2600 x 2200
Packing Size (L x W x H mm): 2650 x 2200 x 2400 - Verwertungsauftrag:
- NetBid GmbH (Austria)
*** Končano *** Pinnacle VMC650 CNC Vertical Machining Center with Fanuc Control System
NazajFormat ponudb
Trading Premium- Konec :
- 22. 03. 2018
10:00 - Število ponudb:
- 0 Ponudbe
- Stanje :
- Prodaja končana
- Št. ponudba:
- X14222-1
- Kupčeve premije
- 15,00%
CNC Vertical Machining Center with Fanuc Control System
Št. ponudba: X14222-1
prijava
Za uporabo te funkcije se morate prijaviti.
It is not possible to bid on this machine at this moment
* Ponudba in limit se razumeta plus provizija in DDV.
Ne obstaja No dostava. Prosimo, razmislite o dodatnih stroških, kot so demontaža, prevoz, zavarovanje, itd.
* Ponudbe od 5000 € zahtevajo potrditev (to velja tudi za druge dražbe).
-
Podrobnosti CNC Vertical Machining Center with Fanuc Control System
-
Kontaktna oseba
Aron Magyari, T (+43) 676 483 8091, M (+36) 30 2748 744,
magyari@netbid.com